CtP, Analog, and Polyester
Plate Processing Equipment
On-Line and Off-Line
Film Processing Equipment

Explanation of Models

ML and MX Plate Processors
ML Plate Processors are for subtractive analog plates.
MX Plate Processors are for Thermal CtP plates.
The numbers indicate the maximum plate size. For example the MX 33 CtP will processor Thermal plates up to 33" wide.

Prostar Silver Line Models
The first two digits on the prostar line are the inlet width in inches (although please allow 1/2" on both sides for film clearance, e.g. SL 331 should have 32" max film width), the second digit is the tank depth.
The "0" tank depth can run film or polyester plate material without any modification.
The "1 and 2" tank depth are only for film.

EG, EP and EGP models
The first two digits are the inlet width of the processor and the third digit is the tank depth.
inlet widths are in centimeters.
EP Models are configures for Polyester Plate material.
EGP Models are COMBI processors that have six baths for film and polyester plate material in one unit.
These models will now come with the new celis electronics

Speed 71
The Speed 71 only comes in one width and that is 28".

CA Systems, Inc.
W6637 Highway 12
Fort Atkinson, WI 53538
Ph: 800-759-3956
Fx: 920-563-4868
E-Mail: erin@carnfeldt.com